List Price: $169.95
Sale Price: $100.00
You save: $69.95 (41%)

See Reviews For This Product

Description

The Elation DP-415 is a 4-channel portable dimmer/switch pack with 8 - 3-prong Edison sockets (2 for each channel) controlling up to 8 fixtures. Each output channel contains dual 15-amp Edison sockets that allow for 2 devices to be plugged into a single channel. Each channel on the DMX dimmer can then be controlled via standard DMX-512 signal by adjusting a relevant channel fader on your DMX console. The dip switches on the face of the DMX lighting control allow you to set the DMX patch address and operation mode for the pack. Standard binary code should be used to set your DMX patch address. Dip switch 10 is the "Mode" switch. The setting of this switch determines the pack's operation mode, either as a dimmer or switch pack. It also has 4-channel output LEDs, which allow you to view active channels. When the Elation DP-415 dimmer is set to dim mode, these LED lights dim in real time as the relevant channel is adjusted. A DMX signal indicator LED is also incorporated so that when DMX signal is present, the LED illuminates. The built-in hanging bracket is reversible to hang on a truss or can be used with a clamp.

Features

• Compact 4-Channel DMX Dimmer
• 2x 3-pong Edison plugs per channel (8 total plugs)
• Assign as a dimmer pack or switch pack
• Use with DMX Controoler when using Par Cans or DJ lighting
• Max Power: 500W per channel

List Price: $39.95
Sale Price: $17.95
You save: $22.00 (55%)

See Reviews For This Product

Description

GLS Audio now has high quality True DMX Cables. Constructed to meet ALL E1.11 Electrical Specifications and USITT DMX512-A standards, our GLS Audio DMX Cables have twisted pair conductors, an outer layer of dense polythylene insulation with a Duofoil and braided tin copper shield. Rated at the optimal 120 ohm impedance with 22 AWG stranded tinned copper conductors, our DMX Cables are the choice cable for any lighting, data, dimmer pack or linking that you need to do. The 3-pin XLR Connectors with compression strain relief are TIA EIA-485 and RS-485 voltage level appropriate and provide the necessary differential signaling. These cables are perfect for any of your stage and studio lighting or equipment controllers.

Features

• 3 Pin XLR DMX Black Annodized Connectors
• 120 ohm Impedance
• 22 AWG Stranded Tinned Copper Conductors
• Duofoil and Braided Tinned Copper Shielding
• Professional Quality and Construction

List Price: $99.95
Sale Price: $49.95
You save: $50.00 (50%)

See Reviews For This Product

Description

GLS Audio now has high quality True DMX Cables. Constructed to meet ALL E1.11 Electrical Specifications and USITT DMX512-A standards, our GLS Audio DMX Cables have twisted pair conductors, an outer layer of dense polythylene insulation with a Duofoil and braided tin copper shield. Rated at the optimal 120 ohm impedance with 22 AWG stranded tinned copper conductors, our DMX Cables are the choice cable for any lighting, data, dimmer pack or linking that you need to do. The 3-pin XLR Connectors with compression strain relief are TIA EIA-485 and RS-485 voltage level appropriate and provide the necessary differential signaling. These cables are perfect for any of your stage and studio lighting or equipment controllers.

Features

• 3 Pin XLR DMX Black Annodized Connectors
• 120 ohm Impedance
• 22 AWG Stranded Tinned Copper Conductors
• Duofoil and Braided Tinned Copper Shielding
• Professional Quality and Construction

List Price: $214.99
Sale Price: $149.99
You save: $65.00 (30%)

See Reviews For This Product

Description

BRAND NEW CHAUVET LED SHADOW 3 CHANNEL DMX 512 BLACKLIGHT PANEL WITH BUILT IN AUTOMATED PROGRAMS, SOUND ACTIVATED PROGRAMS, OR DMX CONTROLLABLE + CONTROLS ADJUSTABLE THROUGH MASTER, SLAVE, OR DMX
Features:

3-channel DMX-512 LED UV blacklight
Sleek and slim casing for the ultimate durability
Low power consumption with new LED technology
Blackout/static/dimmer/strobe
Adjustable flash rate, dimmer and static in stand-alone via dipswitches
Built-in automated programs via master/slave or DMX
Built-in sound activated programs via master/slave or DMX
Coverage up to 20ft x 20ft
Linkable with LED Techno StrobeTM, LED Techno Strobe TM RGB, LED ShadowTM 2, LEDsplash®200B and LEDsplash®2 in stand-alone
Additional power output: max 50 units @ 120V (see manual for details)
Includes brackets for wall and truss mounting
Beam angle: 20°
Wavelenght: 405nm
Light Source: 192 (UV) LEDs 100,000hrs
Power and current: 120V, 60Hz: 12W, 0.1A operating, 0.2A inrush
Power: Autoswitching 100V - 240V 50/60Hz
Weight: 4.9lbs (2.2kgs)
Dimensions: 14in x 9.8in x 6.5in (356mm x 248mm x 165mm)

Features

• 3-channel DMX-512 LED UV blacklight
• Sleek and slim casing for the ultimate durability
• Low power consumption with new LED technology
• Blackout/static/dimmer/strobe
• Adjustable flash rate, dimmer and static in stand-alone via dipswitches

List Price: $154.99
Sale Price: $62.95
You save: $92.04 (59%)

See Reviews For This Product

Description

HID bulbs are simply designed using a different technology to produce the light. Instead of a fine piece of wire filament, the light comes from a glass chamber of gas with no filament. Thus, road bumps and shock cannot damage the lamp. Our kit is one of the most bright on the market! Your eyes will be amazed how much better you can actually see driving on dark roads. Please check with your local law enforcement agency before using the HID light as diffrerent cities in the US have different laws regarding the use of High Intensity vehicle lights, or you can use for off-road vehicles and show vehicles. Product Specifications: * For vehicles that require 9007 headlamp bulbs * Color: 8000K (soft blue) Note: When installing the HID lights and the ballast, please be careful to confirm the polarity of the power cable. The positive side of the plug corresponds with the "+" side on the ballast.

Features

• HID DIGITAL H8-8000K Xenon High Intensity Discharge Conversion Kit with Digital Ballasts
• 8000K
• Digital Ballasts

Sale Price: $39.99

See Reviews For This Product

Description

This DMX common controller adopts the advanced micro control unit, receives standard DMX-512 digital control signal and transformed it into PWM signal to driving LED; You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.
Each DMX common controller occupied 3 DMX address, adopt coding switch set address. Max output power 144watt, able to connect 20M 5050 150LEDs/pc or 10M 300LEDs/pc RGB strip light.

Features

• Decoder is designed to convert the universal standard DMX512/1990 signal into analog signal to control our RGB Flex Strips, it allows user to choose 1~3 output channel, with 256-level brightness control
• 256 steps of smooth brightness adjusting
• User addressable DMX interface-with easy dip-switch settings and testing modes
• High power output, 3 output channels
• DMX pass through and in/out connector for daisy chain configurations

Sale Price: $5.99

See Reviews For This Product

Description

Fuse Holder for the Matrix DMX PRO dimmer pack, includes:- Fuse Holder- retain screw- fuse cap

List Price: $344.52
Sale Price: $319.43
You save: $25.09 (7%)

See Reviews For This Product

Features

• Adapts NSI 128 Channel Micro-Plex to any 0-10 V Dimmer Packs
• 19 inch Rack Mountable Chassis
• LED Operation/Intensity Indicators
• Automatic Lamp Test Function
• Expands Easily and User Programmable for Assignment of any of a Possible 128 Channels

List Price: $61.38
Sale Price: $55.80
You save: $5.58 (9%)

See Reviews For This Product

Description

What if you need to do more than dim a resistive incandescent light in your DMX control chain? What if you need to provide an on/off function? Just like the K8039 dimmer, if you are switching a device that doesn't have a standard DMX control input, you're pretty much out of luck... unless you have this handy little relay board! Here's how it works: First we plug this relay board into the DMX control daisy-chain (or directly to a controller if that's all you're controlling). Next, set the dip switches to the desired DMX address. There can be up to 512 addresses in a single DMX chain, so you've got plenty of room to add more devices later! Finally, map that address in your controller, and you're now "talking" to the relay switch with the controller, and can enable the on/off function of the relay. It's that simple! The switch is actually a bus-controlled power driver. The on-board relay will be activated when the DMX value of the set channel equals 140 or more, and will shut off when the value is 120 or less. LED indication is provided on the board for power supply and DMX error detection. In addition, "Safe DMX Data Stream" mode is used to reduce interference. If the DMX signal is lost (i.e. somebody trips on the cable!) the "Relay Hold" function will continue to latch the relay. DMX input is via a standard XLR connector. Relay switching capacity is 8A. The board runs on any 12VDC unregulated power supply or source. Available as a do-it-yourself kit or factory assembled & tested for immediate use. Board measures 4.1" x 2.4" x 1.2" From Velleman.

Features

• 8 Amp switching capacity!
• 512 DMX channel addressability!
• Relay hold in case of DMX signal loss
• Runs on 12VDC
• Electronic Kit - Assembly and Soldering Required