Sale Price: $85.95

See Reviews For This Product

Description

PAR LED-C is a RGB LED controller featured with color chase, and fades of RGB LED, and operated via DMX, sound active, etc. that will provide you splendid vision enjoyment.This controller not have the ability to control each unit individually - control all units at the same time.Features: - Blackout- Disables or enables all channel outputs. - FULL ON - All LEDs on. - SOUND ACTIVE - Activates Sound Active mode. Chase mode must be active for Sound Active to work. - MASTER FADE - to control the dimming and strobe effect. - SPEED/FADE TIME FADE - adjust the speed of the chaser or the fade time of a program. - CHASE/COLOR MIX FADE - choose your chase or color mix. - COLOR MIX BUTTON - activate the Color mix programs. Use the Chase/Color Mix fade to select one of 32 Color mixes. - CHASE BUTTON - activate the Chase programs. Use the Chase/Color Mix fade to select one of 12 chases. - HOLD BUTTON - use to hold one of nine colors. - COLOR SELECT BUTTONS - Select one of the nine colors. Hold must be selected for Color Select to work. Specifications: - DMX Output: 3Pin female XLR

See Reviews For This Product

Description

When used in independent mode and DMX mode, it can generate various color changing effects, such as flashing, fading, steady, seven color jumping synchronously etc. DMX256 class gray degree dimmer, DMX programmable (thousands of effects available when using many lights) . Available in black and white body. 36 one watt Led's. 2520 lumen output. Red, Green and Blue high power leds. DMX controlled built in and remote control. Plugs into stand 110-220 VAC receptacle. Approximate size is (L) 13.5" x (W) 6" x (H) 8.5" approx 12lbs. Comes with bottom mounting plate. Applications Building facade lighting (graze lighting, flood lighting, wash lighting) for mansions, theaters, casinos, bridges, hotels and shopping centers,Great for indoor or outdoor Indoor use: wash lighting for special events, concerts, clubs, hotels, theaters. Landscape lighting for gardens, theme parks and entertainment plazas.

Features

• LED Quantity: 36PCS *1Watt Power LED Color: red,yellow,green,blue,white and RGB

List Price: $65.00
Sale Price: $48.00
You save: $17.00 (26%)

See Reviews For This Product

Description

Mysteriously illuminating from above, below, or within, StarStrand discreetly goes where no light has gone before, even under water. Unthinkably thin strips of LEDs adhere to surfaces unfit for traditional fixtures, bathing the most unusual places with dimmable warm white light or a remote-controlled rainbow of vibrant colors for a virtually undetectable, surprisingly unpredictable effect.

Features

• Height: 0.11" Length: 12" Width: 0.39"
• Uses LED light bulb
• Power supply required: 120 volts
• Rated for interior damp installation
• Safety certification: UL (Underwriter's Laboratory) listed

List Price: $214.99
Sale Price: $149.99
You save: $65.00 (30%)

See Reviews For This Product

Description

BRAND NEW CHAUVET LED SHADOW 3 CHANNEL DMX 512 BLACKLIGHT PANEL WITH BUILT IN AUTOMATED PROGRAMS, SOUND ACTIVATED PROGRAMS, OR DMX CONTROLLABLE + CONTROLS ADJUSTABLE THROUGH MASTER, SLAVE, OR DMX
Features:

3-channel DMX-512 LED UV blacklight
Sleek and slim casing for the ultimate durability
Low power consumption with new LED technology
Blackout/static/dimmer/strobe
Adjustable flash rate, dimmer and static in stand-alone via dipswitches
Built-in automated programs via master/slave or DMX
Built-in sound activated programs via master/slave or DMX
Coverage up to 20ft x 20ft
Linkable with LED Techno StrobeTM, LED Techno Strobe TM RGB, LED ShadowTM 2, LEDsplash®200B and LEDsplash®2 in stand-alone
Additional power output: max 50 units @ 120V (see manual for details)
Includes brackets for wall and truss mounting
Beam angle: 20°
Wavelenght: 405nm
Light Source: 192 (UV) LEDs 100,000hrs
Power and current: 120V, 60Hz: 12W, 0.1A operating, 0.2A inrush
Power: Autoswitching 100V - 240V 50/60Hz
Weight: 4.9lbs (2.2kgs)
Dimensions: 14in x 9.8in x 6.5in (356mm x 248mm x 165mm)

Features

• 3-channel DMX-512 LED UV blacklight
• Sleek and slim casing for the ultimate durability
• Low power consumption with new LED technology
• Blackout/static/dimmer/strobe
• Adjustable flash rate, dimmer and static in stand-alone via dipswitches

Sale Price: $60.50

See Reviews For This Product

Description

 RGB LED Amplifier 8A/ChConstant Voltage Power Repeater is suitable for all of our RGB controllers to expand power output.~LT-390 Constant voltage power repeater~Supports PWM (Pulse Width Modulation) control~You can stack amps (2x repeaters connected = 16A/Ch)~Input Power:  DC12V ~ DC24V~Output Power: 300W (12V)  600W (24V)~Product Dimension: L135 x W95 x H55 mmYou can just connect the output of our RGB Controller (DMX or IR) to the input of this controller and connect another power supply.  Then, you can connect and control up to 8A/Ch of output (8x rolls of our RGB flexible LED strip).Power supply is not included; we always suggest using switching mode power supplies for any application that involves LED lighting.

Features

• LT-390 Constant voltage power repeater
• Supports PWM (Pulse Width Modulation) control
• You can stack amps (2x repeaters connected = 16A/Ch)
• Input Power: DC12V ~ DC24V

Sale Price: $26.99

See Reviews For This Product

Description

1. This product adopts a super flexible PCB board as base and chip RGB LED as its luminous body. Viewing angle is 120°. There are two specs for selection: 15 pcs LED (12VDC) and 24 pcs LED (24VDC). These LEDs are evenly arranged on the PCB board. Its color is soft and well mixed. The ribbon could be connected with each other via male and female connector. It is exquisite in appearance with 3M tape on its back. Two different operating voltage for selection: 12VDC or 24VDC. *** 2. The LEDs of this product are from famous international company. The luminous body is of very high intensity, large viewing angle,good quality and stability. *** 3. Three LEDs or six LEDs make one group and each group can be cut according to the length requirement. Very convenient for application. *** 4. Consumption Watt:3.6W/0.5m (12VDC) or 5.76W/0.5m (24VDC) *** 5. LED spacing: 33mm or 20mm *** 6. When controlled by DMX512 controlling system, it can realize many kinds of changing effects , such as multi-color jumping, gradual color changing and etc. It also could be controlled by RGB controller IMG-CT308. It is mainly for indoor application,such as small floodlight, cove lighting, edge lighting decoration, stair decoration, outline drawing, etc. *** 7. Package: 5m/Reel or 0.5m/PC

Features

• Lenght:5M 150LED RGB
• Power Consumption: 36W
• Voltage: DC12V
• long time life

List Price: $200.07
Sale Price: $199.99
You save: $0.08 (%)

See Reviews For This Product

Description

4-CHANNEL DMX LINEAR WASH LIGHT. BUILT-IN AUTOMATED & SOUND-ACTIVE PROGRAMS. BEAM ANGLE: 37 FT X 33 FT. LIGHT SOURCE: 192 LEDS 4 RED, 64 GREEN, 64 BLUE. STATIC COLORS & RGB COLOR MIXING WITH OR WITHOUT CONTROLLER. . . . . . . . . .

Features

• 4-CHANNEL DMX LINEAR WASH LIGHT.
• BUILT-IN AUTOMATED & SOUND-ACTIVE PROGRAMS.
• BEAM ANGLE: 37 FT X 33 FT.
• LIGHT SOURCE: 192 LEDS 4 RED, 64 GREEN, 64 BLUE.
• STATIC COLORS & RGB COLOR MIXING WITH OR WITHOUT CONTROLLER.

Sale Price: $4.79

See Reviews For This Product

Description

Easy to connect and operate Control a variety of LED light by adopting an advanced micro control unit With Voltage: DC 12V Max. output current: 6A Max. output power: 72W Working temperature: -20°C - 60°C

Features

• 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change.
• 16-classes Static Mode Dim Control:
• 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change.
• Input Voltage: 12V (Power supply is not included. You can easily connect to the standard notebook computer power supply)
• 6 DIY keys, you adjust the R/G/B color freely

List Price: $19.99
Sale Price: $8.49
You save: $11.50 (58%)

See Reviews For This Product

Description

DMX Slave controller / switch for 3 channel RGB control +12V DC driver required (Max 6A, 72W). Supplies max 2A per channel (CMOS Open Circuit) (72W Total) – perfect for LED Flex Strip reel EV-ST-WP-RGB Used with Master DMX controller, i.e. EV-DMX512 Size: 2.83” L x 1.50” W x 1.02” H (72L x 38W x 26H mm) 0.075kg / 0.17lb Working temp -20C to +60C 1 year warranty

Features

• DMX Slave controller / switch for 3 channel RGB control
• +12V DC driver required (Max 6A, 72W). Supplies max 2A per channel (CMOS Open Circuit) (72W Total) – perfect for LED Flex Strip reel EV-ST-WP-RGB
• Used with Master DMX controller, i.e. EV-DMX512
• Size: 2.83” L x 1.50” W x 1.02” H (72L x 38W x 26H mm)
• 0.075kg / 0.17lb

Sale Price: $149.99

See Reviews For This Product

Description

The Apollo DMX LED Color-Changing Controller is a dual-mode, custom programmable LED lighting control system for RGB lights. The Apollo Controller offers both DMX and PWM output, along with PC-compatible computer software that allows for user-friendly custom lighting programming. Unlike other color changing LED controllers on the market, the Apollo is able to output its signal either in DMX or via pulse width modulation (PWM) and has a memory to store your DMX commands. This RGB LED controller is the first of its kind in the LED lighting community and was engineered by Elemental. Dual control gives the Apollo the ability to command DMX devices, like RGB LED wall washers and color-changing PAR cans, and to drive three channels of PWM to control LED lighting fixtures like strip lights and light bars. The Apollo Controller System includes: DMX Controller with PWM function Software USB cable Elemental has developed computer software to be used in conjunction with the Apollo Controller. This software allows the user to visually design custom lighting scenes on the computer, load them into the Apollo, and then play them back through light fixtures without the computer. The software incorporates simple flowchart-style design and uses cues such as "Fade to Color" and "Pause on a Color" to construct scenes and create previews on the computer. With the Apollo System, custom lighting is only a few steps away. Setup and use of the Apollo Controller system is so simple, anyone can do it: Install the Apollo software onto your computer. Design up to 10 lighting scenes on your PC using Apollo software. Connect the Apollo Controller to your computer using a USB cable and transfer your customized lighting scenes to the unit. Using the buttons and the numerical display on the Apollo, trigger any of the scenes through